Rainwater is collected from the roof and stored in either an underground or above ground tank. The collected water passes through a filter into the holding capturing large debris and leaves. The system is equipped with an internal pump to propel the rainwater to the point of use when required. A floating suction fitting is connected to the pump which extracts rainwater taking from the cleanest layer of the tank. Excess rainwater is removed from the holding tank by means of an overflow and passes into the storm drain. A mains water back up is supplied to ensure continuous supply of water to the services. The mains back up is configured to ensure a minimum mains water is used.

The Domestic Rainwater Harvesting system is available from 1600 litres upwards.

Features of the Domestic Rainwater Harvesting System

• Leaf Filter
• Calmed Inlet
• Pump
• Holding Tank
• Outlet direct to services
• Outlet Direct to header tank
• Outlet from Header tank to services
• Overflow
• Control Panel
• Mains Water Backup